Memphis Elite Built?In Installationshandbuch PDF herunterladen (Seite 45)

English

If, when setting the temperature for the core temperature sensor, you press the Temp up arrow (2)

until 121°C is displayed and then press it once more, the ITC displays "NOPR". In this setting, alt-

hough the ITC shows the temperature of the meat, it does not automatically switch to Done mode at

any temperature.

If you are not using the core temperature sensor, you should not leave it in the grill.

Please keep the core temperature sensor and lead as clean and dry as possible. Clean the sensor with a

damp sponge or cloth moistened with a little alcohol cleaner.

If the core temperature sensor and lead are exposed to damp for an extended period, false temperature

readings may be indicated on the ITC display. In extreme cases, the display may constantly show

"0°C"/"32°F". To rectify this problem, the core temperature sensor and lead must be completely dried out.

Once completely dried out, the sensor will be fully functional again.

When cleaning the core temperature sensor and lead, DO NOT immerse them in water and DO NOT clean

the sensor in a dishwasher.

#HQDBSÄA@QADBTDHMFÄVHSGÄ#HQDBSÄ%K@LDÄHMRDQS

With the direct method, the food is cooked directly over the pellets. Food that requires less than 25 minutes

to cook is cooked by the direct method. To make sure the

food is evenly cooked all the way through, it should be

turned once after half the cooking time. Foods such as

steaks, chops, kebabs and vegetables can be cooked in this

way. The Direct Flame insert is interchangeable with the

EZ-Access insert and thus enables direct barbecueing above

RFCk?KCQMDRFCNCJJCRjPC2FC+CKNFGQ"GPCAR$J?KC

Flavorizer insert is compatible with the Memphis Elite, Pro,

Advantage Plus and Built-In models.

q Remove the grates and the EZ-Access Flavorizer insert,

e.g. with the aid of Genie Multi-Tool.

q Replace the EZ-Access Flavorizer insert with the Direct

Flame insert.

q 0CjRRFCEP?RCQ?LBAJMQCRFCJGBMDRFCEPGJJRM@CEGL

with.

q Switch the grill on and increase the temperature to

the highest possible setting (Elite 370°C, Pro 344°C, Advantage Plus 316°C). Now wait until the grill has

reached the maximum temperature and keep the lid of the grill closed for the time being.

q As soon as the maximum temperature is reached and the temperature is also shown on the ACTUAL dis-

play, press the

× arrow button once to switch to Open Flame mode OF-1. Pressing the × arrow button

again switches to OF-2 mode, and a further press switches to OF-3 mode (OF-3 mode is not available

on the Advantage Plus model). OF-3 (or OF-2 on the Advantage Plus model) is the hottest direct barbe-

cueing mode.

q Now it is essential that you open the grill lid in this mode. The display shows the message "OF". In this

mode, display of the internal grill temperature (ACTUAL) is deactivated as it would indicate unreliable

readings with the lid open (e.g. due to the effect of wind, etc.). Nor is it possible to set core temperature

control (Meat Probe) in OF mode.

q Place the food on the grill grate.

Only ever use the grill with the lid closed unless you are using Direct Flame mode. In Direct Flame

mode, the appliance may only be operated with the lid open as described in the instructions above.

If you were to leave the lid permanently closed in Direct Flame mode, malfunctions due to excessi-

vely high temperatures could occur. In that event the appliance automatically cuts out for safety rea-

sons. The fault code "ER-1" then appears on the ITC display. Only ever activate Direct Flame mode if you

F?TCNPCTGMSQJWGLQCPRCBRFC"GPCAR$J?KCGLQCPR?T?GJ?@JCQNCAGjA?JJWDMPRFCNSPNMQCGLRFC$J?TMPGXCP

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Memphis Elite Built?In Installationshandbuch Seite 45

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Barbrque & Grills Memphis Elite Built?In